Showing posts with label panzerfaust. Show all posts
Showing posts with label panzerfaust. Show all posts

Friday, August 29, 2025

The "Übungsfaust": Practice Makes Perfect

Source: Bundesarchiv

     Curiously, the books in my library that discuss the Panzerfaust (”Tank Fist”) and all of its variants leave out one variant that can be clearly seen in the photograph here. In fact, this particular image is pretty widely used in many books and articles. It depicts a Bataillonsführer (denoted by the four rank pips on the black tabs affixed to his great coat collar) of the German Volkssturm overseeing training of Volkssturm militiamen in the usage of the Panzerfaust. It is believed the location was somewhere in Berlin, spring of 1945. For the interested, the Bundesarchiv (German Federal Archives) identification code for this picture is 183-J31391. Anyone familiar with the Panzerfaust's profile will notice some peculiarities with the Panzerfaust the Volkssturmmann (Private) is holding. What he is holding is not a live Panzerfaust at all and it is what today would be termed a Übungsschießgerät, meaning Practice Shooting Device. What it was called in 1945 is not known nor is it known how many of them were actually produced. Besides this photograph, I have another photograph showing a U.S. Army soldier guarding a collection of German weapons and in the background, one of these training devices can be seen. In keeping with the naming theme for the Panzerfaust and its variants, I am going to call it the Übungsfaust (meaning Practice Fist) throughout the rest of this article. Again, there is no historical evidence this name was ever used.

     The Panzerfaust was one of the most important anti-tank weapons available to the German infantrymen. It was simple to build, cheap (costing at most 25 Reichsmarks or $22USD in 1945), and was available in large quantities and the most common variant was the Panzerfaust 60 (Pzf 60). The number referred to the effective range of the projectile, in this case 60 meters. Although the warhead looks like a rocket, the Panzerfaust is technically a recoilless rifle. Within the metal tube was an explosive charge and when triggered, the blast propelled the warhead out of the front of the tube while the rearward blast forces vented out the back of the tube canceled out any recoil. Aiming was accomplished using a flip-up sight and usage of the top mounted trigger would set off the charge. Once the warhead left the tube, four metal fins would unfurl to provide stability in flight. The Panzerfaust 60 was able to penetrate up to 200mm of armor...more than enough to defeat nearly all Allied tanks. The Panzerfaust was also a one-shot, disposable weapon. Once fired, the soldier would discard the empty tube. While it is true that the Panzerfaust deployed during World War Two could not be reloaded by soldiers in the field, the tubes could be reloaded by the manufacturers that produced Panzerfaust. Thus, if German troops held the battlefield where Panzerfaust were used (and if the situation allowed it), the tubes would be collected and sent back to the factories to be reused. In part, this was an attempt to conserve war critical materials.

     So, why was there a need for something like the Übungsfaust? Over 8 million Panzerfaust (of all variants) were built from 1942 to 1945 so surely there were plenty to spare for training. It should be mentioned that Panzerfaust were sold to other Axis countries, namely Bulgaria, Finland, Hungary, Italy, and Romania. Also, around one in eight Panzerfaust were rejected by inspectors and the parts recycled and of those that were issued, around 10% were returned to the factories as defective. Finally, up to 6% of the issued Panzerfaust either misfired or failed to detonate against the target. Combine these factors, that number dwindles rapidly. As such, there can be seen a use for something like the Übungsfaust to ensure as many Panzerfaust can be put into the hands of German and allied Axis troops. 

     According to the website bergflak.com, there were at least three different types of  Übungsfaust and diagrams and plans on how to construct them were distributed via the publication series “Von der Front für die Front" (“From the Front, For the Front”). The publication can be compared to the U.S. Army's “PS Magazine” which contained bulletins on the care of equipment and tricks and tips submitted by soldiers for useful modifications, service/repair methods, and field adaptations. 

     The Übungsfaust was built using spent Panzerfaust. One might also presume that tubes rejected by the factories could also be repurposed for constructing Übungsfaust but given the intent was to have units in the field construct the Übungsfaust, the most likely source were tubes from Panzerfaust which have been discharged. The Übungsfaust permitted the trainee to get familiar with the weapon as it retained the same tube (and heft), sight, and trigger mechanism. The warhead was made of solid wood with no TNT or hexogen explosive inside. This dummy warhead allowed the trainee to practice loading the tube as in some cases, Panzerfaust were shipped without the warhead installed. Another reason for needing a warhead is that part of the aiming process required the warhead to be present. With the sight in position, the operator tucked the tube underneath the arm, peered through the sight, and aligned the range gradients by looking over the top of the warhead's widest point where a protrusion called the korn (literally front sight) was situated.

     The main modification to create the Übungsfaust consisted of inserting a circular chamber piece (with a cap) into the tube, just behind the trigger. In a live Panzerfaust, this is where the treibladung (propellant charge) would have been. To prepare the Übungsfaust, it required two 7.92x57mm Platzpatrone 33 blank cartridges. The wooden bullet was removed from the cartridge and the powder, enveloped in felt wadding, was extracted. The powder charges were placed into chamber and the chamber had a perforation in the front (facing the warhead) and a second perforation facing to the rear. The cap was then closed. An ignitor, using the existing trigger, would set off the powder in the chamber. The resultant detonation, while not as powerful as a genuine Panzerfaust, would still give the trainee some experience of what it would be like to fire the weapon but more importantly, demonstrate the backblast effects which were even more dangerous with the Panzerfaust. In fact, the backblast of a Panzerfaust 60 was lethal out to 3 meters (10 feet). Exactly how far the wooden warhead would be flung from the tube isn't known but distance wasn't the point. The warhead would be collected and assuming it wasn't too beat up, it would be reused. It is said some units would reinforce the warhead with metal bands or sheath it in iron to keep it from being damaged too rapidly.

     Of interest, the Übungsfaust wasn't the only training device for the Wehrmacht's man-portable anti-tank weapons. The other tank buster was the Raketenpanzerbüchse 54 (RPzB 54), better known as the Panzerschreck (“Tank Terror”). This was the German response to the M1 “Bazooka”. Again, documents exist which show how unserviceable RPzB 54 launchers could be modified into training devices by using a heavily cut down Karabiner 98k bolt-action rifle. To facilitate the training process, a wooden facsimile of a 88mm RPzB. Gr. 4312 rocket was fitted to the barrel end of the rifle. The rifle itself was loaded with between one to five Platzpatrone 33 blank rounds. This entire assembly was then loaded into the rear of the tube by the loader in the same fashion as a genuine rocket round. There was even a fake wire and contact so that the loader could practice preparing the rocket (which was electrically fired when the trigger was pulled). The trigger of the RPzB 54 was connected to the rifle's trigger via a rod. When the operator squeezed the trigger, the rod pushed the rifle's trigger backwards, firing off the blank round which then pushed the dummy rocket out the front of the launch tube. There was recoil due to the rifle, something which would not occur when firing a operational RPzB 54.

Thursday, July 15, 2021

The PzF 44 Lanze: Germany's Post-War Panzerfaust

(Bundeswehr Photograph; Author's Collection)

     When the German Bundeswehr (Federal Defense) was founded on November 12, 1955, much of the equipment it received was supplied by the United States. In part, this was due to the fact that the German arms industry was not fully recovered from World War Two but also that there was some surplus of German wartime weapons (mainly the Karabiner 98k bolt-action rifle) as well as ready availability of U.S. arms, field equipment, and uniform items. In the latter, it was purposely designed that the new Bundeswehr uniforms bore almost no resemblance to the Wehrmacht uniforms of the war and so they had a very U.S. Army influence such as uniform cut, the wearing of U.S. steel helmets, and usage of U.S. Army style boots.

     By the end of the 1950s, the main anti-tank weapon for Bundeswehr infantry panzerjäger (tank hunter) was the U.S. Army M20A1 and M20B1 “Super Bazooka” which fired a 88.9mm HEAT (High-Explosive Anti-Tank) rocket out to a maximum range of 1,000 yards. At an effective range of 200-300 yards, the HEAT round could penetrate up to 280mm of armor. The U.S. Army also unloaded many obsolete M9 and M9A1 60mm “Bazooka” weapons on the Bundeswehr, most of which had been built during the war. The HEAT round on the M9 could penetrate 102mm of armor at 120 yards. The M9, however, was typically kept for training rather than utilized as a front-line anti-tank weapon. Despite the decent performance of the M20, the Bundeswehr wanted a German designed and built anti-tank weapon developed that could replace the M20 but more importantly, surpass it in terms of capability.

     In 1960, Dynamit Nobel AG commenced work on just such a weapon and the result was the reloadable Panzerfaust 44mm DM2 Ausführung 1 (Tank Fist 44mm DM2 Version 1). The PzF 44, nicknamed the “Lanze” (“Lance” or “Spear”), utilized a smooth launch tube which was 44mm in diameter. Fitted to the tube was the fire control handle, pistol grip, firing mechanism, and an optical sight. During travel, the optical sight was removable and to protect it, the PzF 44 operator carried it in a case. In an emergency, the PzF 44 had a simple mechanical sight graduated out to 180 meters. The PzF 44, perhaps not to any surprise, encompassed some aspects of the German wartime Panzerfaust. Like the Panzerfaust, the PzF 44 operated on a recoilless principle. The projectile was propelled out of the launch tube by a charge which, at the same time, blew a counterweight of finely grained iron powder out the back of the tube, thereby canceling out the recoil. However, unlike the wartime Panzerfaust which lobbed an unpowered warhead, the PzF 44 launched a rocket. After firing, folding fins deployed (as they did with the Panzerfaust) and several meters away from the firer, the rocket motor ignited, propelling the rocket towards the target at a speed of 210 meters per second. The original rocket, the DM-22, had a oversize 67mm warhead shape that was very similar to the Panzerfaust 150m which had managed to enter troop trails in the final weeks of World War Two. At an effective range of 300 meters, the DM-22 could penetrate 280mm of armor. This, however, was on par with the M20 and so the 90mm DM-32 was introduced that could punch through 375mm of armor but at the cost of a reduced effective range of 200 meters. The actual launch of the rocket was done by an ignition cartridge. A magazine held several cartridges with the magazine fed into the pistol grip and a bolt-action mechanism loaded a new cartridge and expelled the spent cartridge case after each firing. Following trials, the PzF 44 was accepted for service in 1963 and was later supplemented by the Leuchtbüchse 84mm, the German designation for the Swedish 84mm Carl Gustaf recoilless rifle. Each infantry platoon was equipped with one PzF 44. By 1992, the PzF 44 was replaced by the disposable Panzerfaust 3 (Pzf 3) anti-tank weapon, the latter of which was also developed by Dynamit Nobel AG.

     The photograph shows a gathering of soldiers and civilians in which a Heer (Army) officer is holding a PzF 44. His rank appears to be that of Oberst (Colonel) as is the rank of the officer across from him. Both of the men, as are a few of the soldiers behind them, are wearing the Bundeswehr-Splittermuster (Splinter Pattern) camouflage feldbluse. This pattern was derived from the World War Two German Heer camouflage but was not an exact copy. Curiously, the camouflage was deliberately printed with slipped printing screens which caused the white border on some of the edges of the camouflage pattern. This Kampfanzug (battle suit) encompassed both the tunic as well as trousers and was issued beginning in 1956 before being phased out in the mid-1960s. Some of the feldbluse did not have epaulets and so the rank which would have been fitted to them was sewn directly onto the shoulders. Interestingly, the Oberst on the left has his rank both on the epaulets as well as the shoulder while the Oberst on the right does not. The soldier directly behind the Oberst does not appear to have epaulets at all. A noticeable uniform feature which the Bundeswehr managed to retain from the outset was the World War Two style M43 Einheitsmütze (field cap) that the PzF 44 holding officer is wearing as are a number of the soldiers behind him.

     The PzF 44 seen here may be a prototype and it is not fitted with a rocket. There is a simple folding bipod seen to good effect but this did not appear to have been kept as production models used a pistol foregrip. There is a basic cheek-pad for the firer but again, on production PzF 44 weapons, it does not appear as it does here. The magazine for the ignition cartridges can be seen at the bottom of the pistol grip while the cocking handle for the bolt can be seen between the officer's fingers. The PzF 44 was also fitted with an adjustable wire shoulder stock, shown here fully collapsed. This, too, changed to an adjustable stock with a single shoulder piece, not the wire type seen here, on the production PzF 44.